Wood Mouldings are a finishing profile that is milled from a solid piece of hardwood that is available in various dimensions.
As finishing profiles mouldings are available as Ramp Bars, T-Bars, Wood to Carpet Bar, Square Edge Profile, Stair Noses, Scotia and Quadrant.
What is a Ramp Bar?
Ramp Bars are a threshold strip that is installed at the bottom of the doorway (aka doorsill) which provides a smooth and clean transition from higher smooth surface to a lower smooth floor between two different areas of different floor covering heights.
Ramp Bars are also known as ‘wood to smooth’ or ‘reducer profiles’, all these type of profiles are classed as Mouldings.
All our Ramp Bars are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
What is a T- Bar?
T- Bars are a threshold strip that is installed at the bottom of the doorway (aka doorsill) which provides a smooth and clean transition from two smooth surfaces of the same height. Due to the actual ‘T’ shaped profile, they are called T-Bars, all these types of profiles are classed as Mouldings.
All our T-Bars are made solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
What is a Wood to Carpet Bar?
Wood to Carpet Bars are a threshold strip that is installed at the bottom of the door way (aka doorsill) which provides a smooth and clean transition from the wood surface to a carpet floor coverings of two different floor covering heights.
Wood to Carpet Bars are also known as a ‘reducer profile’, all these type of profiles are classed as Mouldings.
All our Wood to Carpet Bars are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
What is a Square Edge Profile?
Square Edge Profiles are a threshold strip that is installed at the bottom of the door way (aka doorsill) or exist which provides a smooth and clean end finish to an installed floor to and exit door or defined clean profile like against a fire hearth.
Square Edge Profile are also known as ‘End Profile’ or ‘L-Section’, all these type of profiles are classed as Mouldings.
All our Square Edge Profile are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
What is a Stair Nose?
Stair Noses are a profile strip that is installed at the edge of a step that is clad in hardwood flooring which provides a smooth and clean edge of step.
Stair Noses are also known as ‘Nosings’, all these type of profiles are classed as Mouldings.
All our Stair Noses are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
What is a Scotia?
Scotia is a finishing strip that is installed at edge of an installed floor where it meets an upright surface like skirting
The general use of scotia is applied to cover the expansion gap that is left between the hardwood floor and the skirting/upright surface.
Scotia is also known as ‘Beading’, all these type of profiles are classed as Mouldings.
All our Scotia are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau.
What is a Flat Bead?
Flat Bead is a finishing strip that is installed at edge of an installed floor where it meets an upright surface like skirting
The general use of Flat Bead is applied to cover the expansion gap that is left between the hardwood floor and the skirting/upright surface.
Flat Bead is also known as ‘Flat Strips’, all these type of profiles are classed as Mouldings.
All our Flat Beads are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau. in differing dimensions.
View Our Range Here
What is a L- Bead?
L- Bead is a finishing strip that is installed at edge of an installed floor where it meets an upright surface like large opening or to create a clean finish where otherwise the installed hardwood floor would be visible or unsightly.
L-Bead is also known as ‘Edge Strips’, all these type of profiles are classed as Mouldings.
All our L-Beads are made of solid hardwood and can be used on wood, concrete and carpeted flooring available in Oak, Stained-Oak, Walnut, Maple, Beech, Cherry, Ash, Iroko and Merbau in differing dimensions.
View Our Range Here
